How to Deal With Double Glazed Repair

You should ensure that your double-glazed window frames are checked regularly, especially if they are expanding or shrinking. This will reduce the chance of drafts.

If you notice condensation appearing between the glass panes, the seal may be failing and should be replaced. Replacing the seal will not only help to reduce condensation, but it will also help to reduce the cost of energy.

Cracked or broken Panes

Double glazing is not impervious to damage and faults can occur which can reduce the energy efficiency of the windows and doors. Repairing double glazing is a relatively straightforward process, but the proper tools and skills are needed to make quality repairs. It is generally recommended to hire a professional to perform the work rather than try to do it yourself.

A broken or cracked pane is the most frequent issue with double-glazed windows. A blow or knock from the outside can cause this, as could the attempt to open a window that is closed. Glass can break or crack into pieces depending on its size and the force that is used to crack it.

You can repair double-glazed glass windows that is prone to cracking by using special tape or putty. This will prevent the crack expanding or getting worse and will stop water, wind or any other elements from entering your home through the cracks.

Condensation in double-glazed windows is another common problem and is usually caused by a failure of the window seal. It is a common occurrence that is caused by weather and temperature changes. Before you attempt to repair your windows, you should check if they're covered by the warranty.

This is usually covered by the company that supplied you with your double glazing, therefore it's essential to contact them promptly and explain the problem clearly. This is best written down, rather than by text or phone. Always keep the original.

If you want to try and repair a misted window by yourself, a popular procedure is to drill an opening in the centre of the damaged pane. A special desiccant is then placed in the hole to absorb any moisture and this can help the condensation issue to get rid of itself. This is a temporary fix and it is recommended you replace your double-glazed units with new ones as soon as possible.

Misty Panes

Double-glazed windows that fog up can be a real issue and cause major disruptions to your home. Once you have identified the source, it's relatively simple to repair. In most cases the cause of the issue is a problem with the seals between your window panes that allow moisture to enter. Poor installation or drainage issues or defective seals from the window manufacturer can trigger this issue.

Standard sealed units consist two glass panes, sandwiched by an open spacer (shown above). The inner surface of the spacer bar is perforated, and the spacer bars have been filled with desiccant to absorb any moisture. The two glass panes then are sealed together and the whole unit is filled with gas to improve its thermal efficiency.

As you can imagine, if the sealed unit fails, then moisture can get in between the panes, and this can create condensation and mist. This can also result in the heat from your home being lost which could lead to significant amounts of money lost through energy costs.

Unfortunately, fixing the misted double glazing window can be a little tricky and isn't something that should be attempted by anyone who doesn't have an extensive understanding of glazing and the construction industry. If you're willing to tackle the challenge, it's possible to repair a misted sealed window by introducing a moisture-absorbing desiccant in the space between the glass panels.

Remember that this is a temporary fix and the condensation might return. The process will need to be repeated. It is much more efficient to replace an affected unit. It will also be quicker and more clean. A replacement will also restore the original insulation of your home that isn't accessible in repairs. If you are experiencing misted windows and condensation, we suggest contacting an established company that provides double glazing. In the meantime, try keeping your windows as dry as possible by ensuring that they are properly ventilated and being cleaned regularly.

Water Leaks

No matter if they are brand new or old, double glazed windows should not leak. Leaking windows are not only an inconvenience but can cause serious damage to your home, including mold development and structural damage, as well as increased heating and cooling expenses. Contact a professional window company as soon as you suspect a problem.

Window leaks are typically an indication of a problem with the seals between the panes of glass. If you notice condensation between the panes of glass, it is an indication that the seal between the two panes is deteriorating. Moisture is now seeping through the insulating space that is between the two panes. A little condensation is perfectly normal. However, if the problem persists and is visible on your home's exterior or interior Double Glazing Window it is the right time to call a repair service.

Another reason for leaks is water collecting at the bottom of the frame of your window. This can be an indication of blocked drain holes or flashing that is not properly installed or an uneven sill. A drainage hole that is clogged is easy to fix by using a coat hanger wire to clean out the gunk. Improper flashing is also easy to fix using roofing caulk to fill in the gaps around the frame. A faulty pitch could be the reason of the window sill sloping to one side. A professional window repair service will be able determine the root of the issue and offer an affordable, quick solution.

It is not uncommon for UPVC windows that are older to leak or break. However it is more economical and efficient to use an expert to repair your double glazing. They can bring your windows' appearance and function to the way they were when they first were released. They can even replace hinges, handles and locks if required. Professional window repair companies will offer you a guarantee for their work. You would not get this if you tried to repair the windows yourself.

Difficulty of Opening

If you notice that your windows are getting difficult to open, you should get in touch with the company through which you bought them. In most instances, a simple repair can fix the problem. If the issue persists then you should think about replacing your windows with new windows that are more modern in design. Double-glazed windows with modern designs offer the most modern features to keep your home secure and warm. They include slimline uPVC frames or aluminium frames with advanced insulation that blocks heat from escaping and innovative security hardware.

Another common sign that your double glazing is in need of repairs is condensation between the glass panes. This is due to a failure of the seals that connect the two panes. Inert gas is supposed seep out between the glass and replace it with moist air, ensuring that your windows remain airtight and thermally efficient. If this isn't happening the seals may have deteriorated or even broken in some way, which could happen over time as a result of weather changes or other causes.

A draught emanating from your double-glazed window also a common sign that the seals have failed, meaning that cold air is leaking into your home. This could lead to higher energy bills, as your heating system will need to work harder to keep the temperature of your home stable.

In some instances, a draught can be fixed by lubricating hinges, handles, or mechanisms on your double-glazed doors or windows. It is important to remember that this is only a temporary solution and you will be required to consult with a professional in the event that the issue continues to persist.

To help reduce condensation, you can install ventilation in your doors and windows for reducing condensation, such as extractors or air bricks. It is also important to allow your double-glazed doors and windows to 'breathe,' which you can achieve by using trickle vents.