Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any fragments of glass fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your home until a professional arrives to repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap is large, you may think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues, including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need to open the window repair near me to get to the frame. After that, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you are happy with the fit of the window, tighten the screws to keep them in the right position.

If you cannot reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, Double glazed Window repairs near me which causes them to loosen. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it could also be caused by the handle mechanism wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need close the window and double glazed Window repairs Near me perform an initial test to ensure that it fits. The joint at the corner of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is crucial to take action if wake up every morning to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature in your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk can be applied. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the Double glazed window repairs Near me-glazed window, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze, it may be hinges at fault. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It's easy to change a window hinge but it's much easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation in the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you suggestions.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. This should be done at least once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash meets the frame. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it may be possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are typically fabric tubes which are filled with a sort of filler and can be put on the windowsill on top. They will keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them instead of fixing them. If you are experiencing problems with your upvc windows, it is best to seek professional assistance as soon as possible.