UPVC Window Repairs

uPVC windows are energy efficient and help reduce heating costs. However, as they age, issues can develop that require repair. This could include damaged hinges, handles, or locks.

DIY people can fix wooden windows fairly easily. It is also cheaper than a new replacement window.

Cracks

Cracks and breaks in windows made of uPVC can be a serious issue. Leaving them unrepaired can lead to water ingress and less effective barriers against cold temperatures and the risk of structural damage. Find a local builder who specializes in the repair of uPVC frames. They should have the required skills, experience and equipment to achieve the most effective results. This will ensure that your crack is repaired before it worsens and you don't need to replace the window glass or window unit.

Small cracks in glass can be fixed by using a variety of home-based solutions. Superglue and masking tape are two of the most common products to hold cracked glass in place for a brief period of time. For deeper cracks the tape may have to extend past the crack on both sides for optimal results.

Additionally, two-part epoxy can be used to fix broken or cracked glass. The majority of hardware stores sell this product for around $10. Make sure your work area is properly prepared prior to mixing the epoxy. Also, ensure you have all the equipment necessary for the job.

If your lower or upper sash is difficult to raise it's because the cords that connect the sash's weights have been damaged. It's a simple repair that can be made using a ladder and a flat-head screwdriver. Replacing a rotted drip cap is a second repair that can be done at home. The drip caps that are not rot-free are available at most home centers and can be nailed or put in place using caulk. Lastly, if you have a double or triple-paned window, be sure to check that one of the panes are not broken. The reason is because the gases in the space between the windows are responsible for increasing the energy efficiency of the window and should not escape.

Water Leaks

If your uPVC windows are leaking, it can damage the interior of your house and lead to expensive repairs. Water leaks may also cause structural damage to your home, as well as the growth of mold. To prevent damage, it's important to repair any issues caused by windows that leak as soon as possible.

The most common reason for window leaks is a damaged sealant around the frame. The use of silicone caulking can improve the condition of the seal back to normal and stop water leakage. It is also essential to look for gaps and cracks around the frame as well in the stone or brick walls surrounding your windows.

A blocked drainage hole or an issue with flashing are the other two typical causes of windows leaking. Check that the drainage holes haven't been blocked or blocked, particularly after a heavy downpour. You should also examine the window's flashing to ensure that it's properly sealed.

It's also important to ensure that your drip cap doesn't have any rot or is missing. A rotted or missing drip cap will let water in the window from above and cause damage to your home's structure. Replacing a drip cap isn't difficult and typically a simple task of buying the new one and nailing it into place.

It's an excellent idea to have your windows checked for water-tightness by a professional. They can use a tool to test your windows' water-tightness and ensure that they comply with the standards of the industry. If your windows fail the test, they'll require replacement. It's a costly fix however it's worthwhile to ensure the safety and security of your family.

Sagging

If your windows don't shut properly, it could lead to many issues, including drafts, condensation and an increase in energy costs. It could also mean that the windows were not properly installed or the sealant has worn out. Fortunately, double there are some things you can do to correct the issue.

In order to double glazing repair Epsom your window properly it is essential to set up a workspace with plenty of natural light. Start by laying newspaper or an old blanket on the floor to shield it from drips or splinters that might be coming from the window as you work.

Use a white cloth soaked in a mixture of detergent and water. This will prevent any stains of color appearing on your windows. Mark the the hinge channel on your uPVC window when you are ready to begin working. Then, remove the channel from the frame and fill the screw holes with epoxy (for uPVC windows) or wood filler (if frames are made from wood). Make sure you smooth the filled hole before it sets.

Install the hinge channel once the holes are filled. Make sure that it is aligned with the window jamb. Also, make sure make sure you drill the new holes approximately quarter inch away from the original locations.

Next, measure the length of the spindle protruding from the underside of your handle and order a replacement on the internet or bring the old one to a hardware store for matching. Then, pull out the setscrew that was on the shaft of the operator, and then file it flat so the set screw is able to be secured to the shaft (photo). Now your uPVC window should shut without difficulty.

Broken Hinges

It will be difficult to open or closing your uPVC windows when the hinges are damaged or not working properly. This can cause an issue with security and stop your home from staying cool or warm. You can easily purchase a new hinge for your uPVC window. It is essential to select the correct type of hinge for your windows.

This is because the hinges have to be the same width to fit into the frame of the window. The most common type of hinge used in uPVC windows is a standard 18mm or 15mm UPVC window hinge. There are also hinges specifically designed for wooden frames. The correct type of hinge can help you avoid common problems with your windows.

The hinges on your windows could be slack or stiff due to a variety of reasons. The hinges may not be tightened enough. To test this, take a screwdriver to locate the friction screw at the end of the hinge. Then loosen it. Then, you are able to adjust the hinge by twisting it in any direction until you achieve the desired result.

If your UPVC window hinges are not functioning as they should, you can call Preston Glass Fix for a quick double glazing repair Epsom. Our technicians will inspect the condition of your hinges and give you advice on the best solution. We can replace your window hinges, adjust them or install new locking mechanisms to ensure that your UPVC windows are secure and safe for a long time to come.

Faulty Locks

UPVC window locks and mechanisms are a very important part of the security of your home, they make it extremely difficult to open the window without breaking. It can be a hassle when a lock fails, but you don't have to replace the entire window.

Sometimes, the issue is an issue that could have been prevented by regular maintenance. This is why we recommend that you have your uPVC windows maintained regularly using our yearly maintenance package to help reduce the likelihood of issues.

Modern uPVC windows come with locks that operate by pushing the nose of the handle across a wedge block then turning the handle to close the lock. They are extremely efficient in keeping the window secure, but with time, they may begin to fail if not properly maintained. We suggest applying WD-40 to the lock a couple of times per year.

If you find that your uPVC window isn't opening or closing as easily as it did in the past, or if the lock doesn't function properly, there could be a problem with locking gearboxes in the frame. It can be difficult to access as it requires removing the seals around the frame of the window, and removing the handle.

A locksmith that specializes in UPVC repair will be able detect the issue quickly, and then replace the malfunctioning locking mechanism with an exact replacement. This quick and easy fix could save you hundreds of dollars by not having to buy new windows.